Independently reported to Touch Panel Control, the following information has been provided for use of TPControl with the SVSI N3000 Encoder (NMX-ENC-3121). The SVSI N3000 Encoder (NMX-ENC-3121) can be used as a preview source for TPControl. As long as HTTP Live output is used. This is supported in all OS’s.
The unit by default setting has ~34 Seconds of latency, but when settings are modified to below, latency is lowered to 11-16 seconds, with an average of 13. I used the encoder at 2000 kbps, with no audio stream
1) On the encoder – Stream Settings:
a. Output Mode – HTTP Live
b. HTTP Live File Duration = 3;
c. Iframe Frequency = 60.
Note – Some OS will support lower Iframe frequency (Apple) but others won’t. In a BYOD environment, I would recommend 60 – 90.
The default HTTP Live settings will work Out of the Box with TPControl – but latency is about 34 seconds.
No other modes of the encoder work with any of the operating systems.